 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| XW2Z XW2Z Dimensions Unit: mm (inch) 3 XW2Z-PPPA FOR 32-POINT PLC I/O MODULES (CONNECTOR TYPE) The G79-PC Cable with a connector for the G7TC cannot be used for the XW2C due to a difference in wiring. The G79-PC Cable can be used for some of the XW2B Screw Terminal Blocks, refer to the XW2B data sheet. Cable length L Wiring Diagram FCN-367J024-AU/F (mated side) XG4M-2030 (mated side) Part number XW2Z-050A XW2Z-100A XW2Z-150A XW2Z-200A XW2Z-300A XW2Z-500A Cable length L 0.5 m (1.64 ft) 1 m (3.28 ft) 1.5 m (4.92 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft) Triangle mark Combinations of Omron PLC I/O Modules and Screw Terminal Blocks PLC I/O module C200H-ID215 C200H-OD215 C200H-MD215 C200H-MD115 C200H-MD501 C200H-ID501 C200H-OD501 C500-ID218CN C500-ID501CN C500-OD415CN C500-MD211CN C500-OD501CN C200H-ID215 C200H-ID501 C500-ID218CN C500-ID501CN C200H-MD215 C200H-MD115 C200H-MD501 C500--MD211CN I/O points 32 points input 32 points output 16 points in/16 points out 16 points in/16 points out 16 points in/16 points out 32 points input 32 points output 32 points input 32 points input 32 points output 16 points in/16 points out 32 points output 32 points input 32 points input 32 points input 32 points input 16 points in/16 points out 16 points in/16 points out 16 points in/16 points out 16 points in/16 points out Terminal block XW2B-20G5 XW2B-20G4 XW2B-40G5-T XW2B-20G5-D Dedicated cable XW2Z-PPPA XW2C-20G5-IN16 (See Note 3) Note: 1. The G79-P Cable with a connector for the G7TC cannot be used for the XW2C due to a difference in wiring. The G79-PC Cable can be used for some of the XW2B Screw Terminal Blocks, refer to the XW2B data sheet. 2. The Input or Output Modules above have two connectors, so each one can use up to two Terminal Blocks and two dedicated cables. 3. The XW2C is a dedicated Input Terminal Block. If the XW2C is connected to a PLC module that handles both input and output signals (modules with "MD" in the part number), only the input portion of the PLC module can be used. 3 XW2Z Unit: mm (inch) XW2Z 3 XW2Z-PPPB FOR 32-POINT AND 64-POINT PLC I/O MODULES (CONNECTOR TYPE) Wiring Diagram Cable length L FCN-367J040-AU/F (mated side) XG4M-4030 (mated side) Part number XW2Z-050B XW2Z-100B XW2Z-150B XW2Z-200B XW2Z-300B XW2Z-500B Cable length L 0.5 m (1.64 ft) 1 m (3.28 ft) 1.5 m (4.92 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft) Triangle mark Combinations of Omron PLC I/O Modules and Screw Terminal Blocks PLC I/O module CQM1-ID213 CQM1-OD213 C200H-ID216 C200H-OD218 C200H-OD21B C200H-ID111 C200H-ID217 C200H-OD219 C500-ID114 3G2A5-ID219 3G2A5-OD213 I/O points 32 points Terminal block XW2B-40G5 XW2B-40G4 Dedicated cable XW2Z-PPPB 64 points Note: 32-point I/O modules use one Terminal Block and one dedicated cable. 64-point I/O modules use two Terminal Blocks and two dedicated cables. 4 XW2Z XW2Z 3 XW2Z-PPPD FOR 32-POINT AND 64-POINT PLC I/O MODULES (CONNECTOR TYPE) Part number XW2Z-100D XW2Z-150D XW2Z-200D XW2Z-P00D XW2Z-300D XW2Z-500D Cable length for A and B B 250 (9.84) Yellow Cable length A 1 m (3.28 ft) 1.5 m (4.92 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft) Cable length B 0.75 m (2.46 ft) 1.25 m (4.10 ft) 1.75 m (5.74 ft) 2.75 m (9.02 ft) 4.75 m (15.58 ft) Note: 1. CN2 (black cable side) is wired to line A of CN1 and CN3 (yellow cable side) is wired to line B of CN1. 2. The G79-PC Cable for the G7TC Terminal Block cannot be used for the XW2C due to a difference in wiring. Black Line Line A B A 500 (19.68) Wiring Diagram FCN-367J024-AU/F CN1 (mated side) XG4M-2030 CN3 (mated side) XG4M-2030 CN2 (mated side) Triangle mark Triangle mark Combinations of Omron PLC I/O Modules and Screw Terminal Blocks PLC I/O module CQM1-ID213 C200H-ID216 C200H-ID217 C500-ID114 3G2A5-ID219 I/O points 32 points 64 points Terminal block Two XW2C-20GS-IN16 input blocks Four XW2C-20GS-IN16 input blocks Dedicated cable One XW2Z-PPPD cable Two XW2Z-PPPD cables 5 XW2Z Unit: mm (inch) XW2Z 3 XW2Z-PPPH-P FOR 96-POINT CS1 PLC I/O MODULES (CONNECTOR TYPE) XW2Z-P00H-1 A XW2Z-P00H-2 A XW2Z-P00H-3 A B C B Part number XW2Z-100H-1 XW2Z-200H-1 XW2Z-300H-1 XW2Z-500H-1 Part number XW2Z-100H-2 XW2Z-200H-2 XW2Z-300H-2 XW2Z-500H-2 Cable length A 1 m (3.28 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft) Cable length A 1 m (3.28 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft) Cable length B 1 m (3.28 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft) Part number A XW2Z-100H-3 XW2Z-200H-3 XW2Z-300H-3 XW2Z-500H-3 1 m (3.28 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5m (16.40 ft) Cable length B C 0.75 ft (2.45 ft) 1 m (3.28 ft) 1.75 ft (5.74 ft) 2 m (6.56 ft) 2.75 ft (9.02 ft) 3 m (9.84 ft) 4.75 ft (15.58 ft) 5m (16.40 ft) Combinations of Omron PLC I/O Modules and Screw Terminal Blocks PLC I/O module CS1W-ID291, CS1W-OD291, CS1W-OD292 CS1W-MD291, CS1W-MD292 CS1W-ID291, CS1W-OD291, CS1W-OD292 CS1W-MD291, CS1W-MD292 CS1W-ID291, CS1W-OD291, CS1W-OD292 CS1W-MD291, CS1W-MD292 I/O points 96 points Terminal blocks Two XW2B-60GP terminal blocks Dedicated cable Two XW2Z-PPPH-1 cables 96 points Two XW2B-40G4 + XW2B-20G4 or two XW2B-40G5 + XW2B-20G5 terminal blocks Six XW2B-20G4 or six XW2B-20G5 terminal blocks Two XW2Z-PPPH-2 cables 96 points Two XW2Z-PPPH-3 cables Note: For detailed information about connector pin-outs, refer to CS1 Operation Manual (W339), Appendix A. 6 XW2Z 3 XW2Z-PPPF CABLE WITH CRIMP TERMINALS (20 POLES) Wiring Diagram Cable length L XG4M-2030 Terminal Y (M3.5) To devices 300 (11.81) XG4M-2030 (mated side) XW2Z Terminal Y (M3.5) Triangle mark Part number XW2Z-100F XW2Z-150F XW2Z-200F XW2Z-300F XW2Z-500F Cable length L 1 m (3.28 ft) 1.5 m (4.92 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft) Combinations of Omron PLC I/O Modules and Screw Terminal Blocks PLC I/O module Use any I/O module with a terminal block from Omron or another manufacturer, or an I/O board for a computer. XW2B-20G5 XW2B-20G4 Terminal block Dedicated cable XW2Z-PPPF 7 XW2Z XW2Z Installation 3 CONNECTIONS BETWEEN OMRON'S I/O MODULES AND SCREW TERMINAL BLOCKS Item PLC I/O modules C200H-ID215 C200H-ID501 C500-ID501CN C500-ID218CN 32-point input modules use two blocks and two cables. Terminal blocks XW2B-20G5 XW2B-20G4 XW2B-20G5 XW2B-20G4 C200H-OD215 C200H-OD501 C500-OD501CN 32-point output modules use two blocks and two cables. Input (ID) Output (OD) Cable XW2Z-PPPA XW2Z-PPPA Connection diagram XW2B--20G5 XW2B--20G5 Cable G79-PC G79-PC Connection diagram XW2B-20G5 XW2B-20G5 8 XW2Z Item PLC I/O module Output (OD) XW2Z C500-OD415CN 32-point output module uses two blocks and two cables. Terminal block XW2B-20G5 XW2B-20G4 Cable XW2Z-PPPA G79-PC Connection diagram XW2B-20G5 XW2B-20G5 XW2B-20G5 XW2B-20G5 9 XW2Z Item PLC I/O modules C200H-MD115 C200H-MD215 C200H-MD501 C500-MD211CN 16-point input/16-point output mixed I/O modules use two blocks and two cables. Terminal blocks XW2B-20G5 XW2B-20G4 Mixed I/O (MD) XW2Z Cable XW2Z-PPPA G79-PC Connection diagram XW2B-20G5 XW2B-20G5 XW2B-20G5 XW2B-20G5 10 XW2Z Item PLC I/O module CQM1-ID213 C200H-ID216 C200H-ID111 C200H-ID217 C500-ID114 3G2A5-ID219 CQM1-OD213 C200H-OD218 C200H-OD219 Terminal block 32-point 32-point 64-point 64-point 64-point 64-point Use one terminal block and one cable. Use one terminal block and one cable. Use two terminal blocks and two cables. Use two terminal blocks and two cables. Use two terminal blocks and two cables. Use two terminal blocks and two cables. Group 2 High-density Input/Output XW2Z 32-point Use one terminal block and one cable. 32-point Use one terminal block and one cable. 64-point Use two terminal blocks and two cables. XW2B-40G5 XW2B-40G4 Cable XW2Z-PPPB Connection diagram ( () XW2B-40G5 ) () 11 XW2Z Item PLC I/O module CS1W-ID29P CS1W-OD29P CS1W-MD29P Use two terminal blocks and two cables. High-density I/O 1:1 Connection XW2Z Terminal block One XW2B-60G5 or one XW2B-60G4 per cable Cable XW2Z-PPPH-1 Connection XW2B-60GP Item PLC I/O module High-density I/O 1:2 Connection CS1W-ID29P CS1W-OD29P CS1W-MD29P Use two 40-point and two 20-point terminal blocks and two cables. Terminal block XW2B-40G5 + XW2B-20G5 blocks or XW2B-40G4 + XW2B-20G4 blocks per cable Cable XW2Z-PPPH-2 Connection XW2B-40GP XW2B-20GP Note: For detailed information about connector pin-outs, refer to CS1 Operation Manual (W339), Appendix A. 12 XW2Z Item PLC I/O module High-density I/O 1:3 Connection XW2Z CS1W-ID29P CS1W-OD29P CS1W-MD29P Use six 20-point terminal blocks of the same kind and two cables. Terminal block Three XW2B-20G5 blocks or three XW2B-20G4 blocks per cable Cable XW2Z-PPPH-3 Connection XW2B-20GP XW2B-20GP XW2B-20GP Note: For detailed information about connector pin-outs, refer to CS1 Operation Manual (W339), Appendix A. NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. 9 OMRON ELECTRONICS, INC. One East Commerce Drive Schaumburg, IL 60173 OMRON CANADA, INC. 885 Milner Avenue Scarborough, Ontario M1B 5V8 1-800-55-OMRON Cat. No. GC RIO-1 04/00 Specifications subject to change without notice. 416-286-6465 Printed in U.S.A. |
Price & Availability of XW2Z-500H-3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |